AdventSource

Carpentry Honor Requirements

Carpentry Honor Requirements

Download

Description

Download the requirements for the Carpentry honor by clicking on the download link above.

Carpentry

1. Describe the function of the following tools:

  1. Band saw
  2. Belt sander
  3. Jig saw
  4. Miter saw
  5. Radial arm saw
  6. Router
  7. Shaper
  8. Wood lathe

2. Demonstrate how to use the following tools:

  1. Block plane
  2. Circular saw (cut a straight line)
  3. Framing square
  4. Hammer
  5. Hand saw (cut a straight line)
  6. Level
  7. Measuring Tape
  8. Nail set
  9. Plumb bob
  10. Wood chisel

3. Describe the use of and distinguish between the following types of nails:

  1. 20 penny
  2. 16 penny
  3. 12 penny
  4. 8 penny
  5. 6 penny
  6. Finish
  7. Brad
  8. Roofing
  9. Screw nail
  10. Sinker
  11. Common
  12. Galvanized

4. Assist in erecting a frame building not less then 6 x 8 feet (1.8 meters x 2.4 meters) in ground dimensions, with a gable roof, and with at least one door and one win-dow, demonstrating ability to measure and use of tools form requirement 2.
5. When building the above project, use all of these features:

  1. Floor joist
  2. Sub floor
  3. Shoe plate
  4. Top plate
  5. Double plate
  6. Conventional roof or trusses
  7. Felt roof
  8. Shingles
  9. Window with weight-bearing header
  10. Door with weight-bearing header
  11. Fascia on eaves
  12. Siding

Note: Participants must be 16 years and older to use power tools.

Skill Level 2
Original Honor 1929

Vocational
General Conference
2001 Edition

Related Downloads

  • 5120 Prescott Ave
  • Lincoln NE 68506
  • United States